Coil is back, and not just for gravity riders. Supple on the small bumps with a smooth stroke to eat up rock gardens and big hits, you can rely on Bomber CR coil to lose none of its exemplary performance over the longest descents. Whether you’re looking to breathe new life into your old ride or searching for a rear shock for your new bike you can set and forget, the Bomber CR is your low-maintenance, high-performing coil solution.
Features
3 simple adjustments; coil spring preload, low speed compression and rebound damping
Size ranges for a slew of bikes ranging from 130mm travel to over 200mm
Set-and-forget design prioritizes suspension performance, ride quality and durability
Affordable, easy to tune and like all Marzocchi products, it’s bomb proof
Adjustable low-speed compression and rebound damping
Bomb proof build for a set it and forget it rider
Imperial: 7.5x2.0”, 7.875x2.0”, 7.875x2.25”, 8.5x2.5”,
8.75x2.75”
Metric: 210x50mm, 210x55mm, 230x60mm, 230x65mm, 250x75mm
Trunnion: 185x52.5mm, 185x55mm, 205x60mm, 205, 65mm,
225x75mm
Warranty: At Marzocchi, we take pride in the products we build and care about your product working the way that we designed them to work.If you’ve purchased a Marzocchi product we’ll do our best to find you a solution through our warranty program. Our warranty policy covers all manufacturing defects for the original owner. Marzocchi products are designed and engineered to withstand some of the harshest riding conditions. That being said, these products have a lifetime and will deteriorate over time and may require service to maximize its performance and functionality. Your Marzocchi Warranty Technician will evaluate the failed product and consider factors such as age, riding hours, intended use of product and use environment when determining a warranty claim. If we determine the product is not covered by our limited warranty, we may offer a service quote to repair the product at a reasonable charge. For full warranty information, please click here.
Buying a shock doesn't have to be confusing. Follow these steps to find the right one:
Shocks are bolted to the frame using one of two methods – eyelet mounts or trunnion mounts. Eyelet mounts run a bolt through the ends of the shock, whereas Trunnion shock have bolts that thread into the shock at the reservoir end. To determine which type you need for your bike, look up your bike model on the manufacturer website – the shock will either have the word ‘Trunnion’ listed beside the shock measurement or not. If it doesn’t say Trunnion, your shock uses standard eyelet mounts.
These two measurements are essential to buying the right shock. Both numbers can be found on your bike manufacturers website. Find where the specifications for your bike are listed and look at the row for Rear Shock. Beside the Brand and model, the manufacturer will list two numbers: the first one is the eye-to-eye and the second is the stroke length.
Metric example: 205 (eye-to-eye) x 65 (stroke)
Imperial example: 7.875" (eye-to-eye) x 3" (stroke)
If your bike is more than three years old, the manufacturer may not list the shock measurements on the model page. If not, use a Vernier Caliper to measure from the center of the top of the shock to the bottom eye – that’s your eye-to-eye. Second, measure from where the stanchion goes into the body to the bottom of the stanchion. That’s your stroke length.
Mounting hardware is the collection of spacers you need to ensure the shock you buy fits your bike. If you’re replacing the shock that is currently on your bike, you can remove the hardware from that shock and press it into your new Bomber CR. If you don’t have the tools to make that switch, you can buy mounting hardware here.
Mounting hardware is dictated by your bike manufacturer. You can usually find it in the Owners Manual, but sometimes it can be tricky to find. If you need help determining what type you have, our friends at FOX created this helpful guide.
If you’re buying a Bomber CR coil shock, you’re going to need a coil spring as well. Use the calculator when you add your shock to cart to determine which spring will suit your weight and bike the best.
You’re now ready to go. If you have any questions at all, reach out to our Rider Support team and they will help you figure it out.
Adjustable low-speed compression and rebound damping
Bomb proof build for a set it and forget it rider
Imperial: 7.5x2.0”, 7.875x2.0”, 7.875x2.25”, 8.5x2.5”,
8.75x2.75”
Metric: 210x50mm, 210x55mm, 230x60mm, 230x65mm, 250x75mm
Trunnion: 185x52.5mm, 185x55mm, 205x60mm, 205, 65mm,
225x75mm
Warranty: At Marzocchi, we take pride in the products we build and care about your product working the way that we designed them to work.If you’ve purchased a Marzocchi product we’ll do our best to find you a solution through our warranty program. Our warranty policy covers all manufacturing defects for the original owner. Marzocchi products are designed and engineered to withstand some of the harshest riding conditions. That being said, these products have a lifetime and will deteriorate over time and may require service to maximize its performance and functionality. Your Marzocchi Warranty Technician will evaluate the failed product and consider factors such as age, riding hours, intended use of product and use environment when determining a warranty claim. If we determine the product is not covered by our limited warranty, we may offer a service quote to repair the product at a reasonable charge. For full warranty information, please click here.
Buying a shock doesn't have to be confusing. Follow these steps to find the right one:
Shocks are bolted to the frame using one of two methods – eyelet mounts or trunnion mounts. Eyelet mounts run a bolt through the ends of the shock, whereas Trunnion shock have bolts that thread into the shock at the reservoir end. To determine which type you need for your bike, look up your bike model on the manufacturer website – the shock will either have the word ‘Trunnion’ listed beside the shock measurement or not. If it doesn’t say Trunnion, your shock uses standard eyelet mounts.
These two measurements are essential to buying the right shock. Both numbers can be found on your bike manufacturers website. Find where the specifications for your bike are listed and look at the row for Rear Shock. Beside the Brand and model, the manufacturer will list two numbers: the first one is the eye-to-eye and the second is the stroke length.
Metric example: 205 (eye-to-eye) x 65 (stroke)
Imperial example: 7.875" (eye-to-eye) x 3" (stroke)
If your bike is more than three years old, the manufacturer may not list the shock measurements on the model page. If not, use a Vernier Caliper to measure from the center of the top of the shock to the bottom eye – that’s your eye-to-eye. Second, measure from where the stanchion goes into the body to the bottom of the stanchion. That’s your stroke length.
Mounting hardware is the collection of spacers you need to ensure the shock you buy fits your bike. If you’re replacing the shock that is currently on your bike, you can remove the hardware from that shock and press it into your new Bomber CR. If you don’t have the tools to make that switch, you can buy mounting hardware here.
Mounting hardware is dictated by your bike manufacturer. You can usually find it in the Owners Manual, but sometimes it can be tricky to find. If you need help determining what type you have, our friends at FOX created this helpful guide.
If you’re buying a Bomber CR coil shock, you’re going to need a coil spring as well. Use the calculator when you add your shock to cart to determine which spring will suit your weight and bike the best.
You’re now ready to go. If you have any questions at all, reach out to our Rider Support team and they will help you figure it out.
Shuttling all day or lapping the bike park ‘til close? The Bomber CR maintains a plush, planted feel that stays consistent during long shred sessions, regardless of rapid elevation or temperature changes. The perfect coil companion to your Bomber 58, Z1, or Z1 Coil fork.
There’s no climb switch or array of dials on the Bomber CR. This is a rugged coil shock that subs the bells and whistles for durability and simplicity. Just set your sag, click in your rebound and go ride.
There’s simply no substitute for the plush feeling of coil suspension. Fewer seals mean less stiction to initiate travel. More small bump sensitivity and a smooth, predictable stroke for the biggest hits. Curious if coil is for you? Looking for a secondary coil shock as a backup or a workhorse for that bike park trip? The Bomber CR is your affordable ticket to the magic carpet ride.
This shock is by far the best performance upgrade for the money that I have ever experienced in almost a decade of riding.
Worldwide Cyclery
…more grip, more traction and more comfort at a fraction of the price of super high-end competitors. As a gateway to the addictive performance of a coil spring, it’s a great option.
mbr.co.uk
Bomber CR just might be the perfect coil upgrade on a budget.
If you want to experiment with a coil on your bike without emptying your wallet, this is the best way to do so – hands down.
mtb-mag.com
Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.
By clicking enter you are verifying that you are old enough to consume alcohol.
